INDUSTRIAL CONDUIT BODY

1.Applications:

Conduit outlet bodies are installed in conduit systems to:Act as pull outlets for conductors being installed

·Provide openings for making splices and taps in conductors

·Connect conduit sections

·Provide taps for branch conduit runs

·Make 90° bends in conduit runs

·Provide for access to conductors for maintenance and future system changes

2. Features:

Conduit Outlet Bodies

·Form 7 Conduit outlet bodies approach conduit in size for neat, compact installations

·Form 8 and Mogul bodies provide more room for heavier conductors

·Conduit hubs have tapered threads(NPT), rigid joints and excellent ground continuity for protection of wire insulation

Gaskets

· Form 7 are used with solid gaskets

·For Form 8 and Mogul, 1/2"-1-1/4" are used with solid gaskets,1-1/2"-4" are used with open gaskets

Blank Covers

· Stainless steel cover screws are standard on Form 7,Form 8,Mogul cover

·Form 7

Wedge nut design facilitates installation and removal. Nuts are held captive in cover.

· Form 8 and Mogul

Two cover screws provided on all sizes to provide tight cover and gasket assembly. The covers have dome shapes

for added strength and extra wiring room.

3.Certifications and Compliances:

·UL Standard: 514A

·CSA Standard 22.2 No.18

·IP:NEMA 3R

4.Standard Materials:

·Form 7 conduit bodies-gray iron

·Form 7 conduit body covers-sheet steel

· Form 8 and Mogul conduit bodies and covers-gray iron or carbon steel(Q345B)

·Gaskets-neoprene

· Cover screws-stainless steel

5.Standard Finishes:

Form 7 conduit bodies-electrogalvanized with aluminum acrylic paint, or hot-dip galvanized with electro galvanized

·Form 7 conduit body covers-electro galvanized

·Form 8 and Mogul conduit bodies and covers-electrogalvanized with aluminum acrylic paint, or hot-dip galvanized

with electro galvanized